Our main markets now include the Philippines, Vietnam, Malaysia, Japan, South Korea, the United Kingdom, the United States, Turkey, Laos, Cambodia, Thailand, Myanmar, Singapore, Indonesia, Brunei, Ethiopia and Venezuela. We are also actively developing the markets of other countries. Welcome to negotiate.
Thermoplastic road marking paint consists of resin,EVA,PE wax ,fillers materials,glass bead,which is solid powder condition at normal temperature,If is is heated to 180-200 degrees by heat fusing pot under construction,it will appears flowage, coating pot under construction, it will appears flowage, coating the paint to the road surface will form hard film,It has full line type,strong wearing resistance and other flowage, Sprinkling reflecting glass micro beads on the surface under consturction, it has good reflecting effect at night , it is widedy applied in highway and road,Accordning to the enviroment used and the different construction requirements,we can supply different types of paint for our customer option.
With the increasing social demand of glass micro-beads ,the increasing of manufacture .and the relatively low price and not standardized quality ,we choose the manufacturer with economic strength according to the our big usage and customize the bloomed glass micro-beads used for road line-marking according to the standardized quality requirement .Three specifications :the surface sprinkling beads for thermoplastic line-marking ,the surface sprinkling beads for normal temperature line-marking ,the surface sprinkling beads for water-base line-marking.We can supply enough stock in hand ever day.
|Raw Material||C5 Petroleum Resin, CaCO3, Glass Beads, DOP, PE, etc.|
|Gravity, g/m3||2.1 g/ml|
|Color||white, yellow, etc.|
|Softening Point, ℃||110℃|
|Coating Appearance||No wrinkles, dots, blisters, cracks, fall-out & stick tyres|
|Drying Time, min||Within 3 minutes|
|Compressive Strength, MPa||26|
|Abrasive Resistance, mg||42|
|Water Resistance||Great(in water for 24 hours)|
|Alkali Resistance||Great(in saturated solution of calcium hydroxide for 24 hours)|
|Glass Beads, %||30~40%|
|Coating Resisitance||Resist -10℃ for 4 hours|
|Heat Resistance||Under 0℃-2℃ for 4 hours|
Package & Use:
|Package||25kg/bag, by plastic woven bag. One ' container can load Max. 25 tons.|
|Storage||dry, cool, avoid direct sunlight|
|Expiration date||365 days|
|Theoretical spray rate||4-5kg/㎡|
Specific formula, of good cohesiveness with road, pre-mark with our company’s dedicated primer (especially for concrete base) will strengthen the cohesiveness.
Our paint has anti-slipping material. On condition of good flowability, the anti-slipping material can ensure good anti-slipperiness and maximize the traffic safety.
3. Reflective effect
According to the settling rate of the glass beads, properly choose stable refractive and high quality coating type glass beads with different particle ratio. Mix them evenly inside the paint and dispense mixed type glass beads when executing will ensure new and old marking always to be in high reflection.
4. Dry fast
Use different formula to produce the paint according to temperature, humidity and roadbed condition when executing, ensure fast drying speed and antifouling property of the marking.
Choose excellent light and heat stability raw material ratio, add ultraviolet-proof additives at the same time, to make sure the long-acting color and luster even under strong sunshine.
6. Anti hair-cracking
Hair-cracking of the marking is a technical problem in road marking material industry home and abroad. After long-term research and by way of adding high temperature resistance lipid material and functional filler, our company completely solved the hair-cracking problem during executing.
Our company located at Lianyungang Port (80 kilometers), the east bridgehead of the Eurasian continent, the starting point of the National One Belt One Road. The geographical position is unique, and the raw material resources are sufficient. It is less than 200 kilometers away from the five manufacturers of C5 petroleum resin, the main material of the road sign material. It has the absolute advantage of material priority and low cost.
echnical strength: The company has six professional and technical personnel, all of whom have been engaged in research and development in the road sign coating industry for more than seven years, and have certain relevant technical strength. The company has maintained close technical guidance and cooperation with several experts from the Ministry of Communications for a long time.
The company currently has six sets of semi-automatic production packaging machines, which can produce more than 200 tons of road marking hot-melt coating products per day. So as to ensure the supply of a large number of qualified products to customers.
In recent years, the company’s products have been adhering to the principle of quality first, and the number of foreign customers has continued to increase. Customers from more than 140 countries and regions around the world have cooperated with us, and customers from 9 countries have chosen long-term exclusive Acting for our company’s products.